Is the pressure tube of your Hatsan leaking?
With this reseal kit you have all the o-rings and valve seat you need to freshen up the pressure tube of your air rifle!

2-part kit

This set consists of two parts: all rings for the side with the valve, or the side with the pressure gauge.
If the pressure tube is not too old, you can choose to overhaul only the side with the defect.

Note: When placing the rings, we recommend lubricating them with silicone grease such as Hill NLGI Grease.
Not only good for these o-rings, but also for the maintenance of the running ring, rings of the filler pin, magazine, etc.!

This set is suitable for the following Hatsan models:

• Galatian 5 Auto
• Galatian 6 Auto
• Invader Auto

Note: For the non-automatic variants such as the Galatian 1,2,3 or 4 and the Invader Bolt Action, please see this reseal kit.