Add all 1/2x20 UNF suppressors to your Snowpeak T-Rex Bullpup with this handy adapter!
While the standard shroud is already very effective, an additional silencer will really quiet it down.

This adapter replaces the endcap of your T-Rex's shroud and is fitted with 1/2x20 UNF threads for other silencers.

To attach this adapter:

1. loosen the 2 set-screws to the rear of the shroud so it can slide forward.
2. Remove the end-cap and replace with the adapter.
3. The adapter will sit slightly deeper than the end cap. So the shroud will have to slide forward.
4. When the adapter is snug, pull the shroud back and tighten the set-screws.

Note: beware of the loose baffles in the shroud. Make sure these are not canted or loose!

We recommend using an oversized silencer.
So for a .22 T-rex, get a .25 silencer. And for a .25, get a .30 silencer.
This is because the adapter is fitted to the shroud and not to the barrel.